1. Home
  2. Charge Controllers
  3. MPPT Charge Controllers
  4. Outback FLEXmax 100 A MPPT Controller

Outback FLEXmax 100 A MPPT Controller

Write a Review
Your Price: $1,530.00
Part Number: FM100
Availability: In Stock.
Outback FLEXmax 100 A 300V MPPT Charge Controller

Product Highlights:
  • 100A output for up to 5kW of charging
  • Compatible with 24, 36 and 48VDC battery banks
  • Integrated ground fault protection
  • System configures quickly with smart programming wizards (MATE3s required)
  • 300VDC open-circuit voltage limit enables 2-string configuration that minimizes BOS

OutBack network communications and OPTICS RE compatibility allows the FLEXmax 100 to be remotely programmed, monitored and controlled via any internet connected device providing unrivalled system integration.

The FM100-300VDC is a top-of-the-line high performance, efficient and versatile charge controller for your advanced power system.

NOTICE: The PNL-GFDI-80 series ground fault breakers that are included in many prewired load centers and FP systems are NOT rated for use on circuits shared with an FM100-300VDC! The FM100-300VDC charge controller is equipped with an internal ground-fault protection device and simply requires 300-VDC rated overcurrent protection on its input and output circuits. The PNL-100/125-300VDC series breakers are recommended for the battery side and the PNL-40/60/80-300VDC series breakers are recommended for the PV array side. Due to the different voltage ratings, OutBack Power does not recommend mixing the FM100-300VDC with the FM60 or FM80-150VDC controllers on the same battery bank. Be sure to thoroughly review installation instructions when installing OutBack Power equipment.

Nominal Battery System Voltage  24VDC / 36VDC / 48VDC
 Maximum Continuous Output Current 100A
 Maximum Input Current (Short-Circuit) 64A
 Maximum Array (STC Nameplate) 3500W / 5250W / 7000W (charging output limited to 100A at battery voltage)
 Maximum PV System Voltage 300VDC
 Operating Input Voltage Range 30VDC to 290VDC
 Standby Power Consumption ~2.5W
 Power Conversion Efficiency 24V: 96% 48V: 97%
 Peak Efficiency 24V: 97.5% 48V: 98.8%
 Charging Regulation Three-stage
 Voltage Regulation Set Points Absorption, float, silent and equalization
 Equalization Charging Programmable start time, voltage set point and duration, automatic termination when completed
 Battery Temperature Compensation Adjustable from 2mV/cell/°C to 6mV/cell/°C
 Voltage Step-Down Capability Down convert from any acceptable array voltage to any battery voltage
 Programmable Auxiliary Control Output 12VDC output signal which can be programmed for different control applications
 Status Display LED indicators
 Remote Display and Controller MATE3s compatible
 Network Cabling Proprietary network system using RJ-45 modular connectors
 Operating Temperature Range Ambient, -25°C to 60°C (-13°F to 140°F), output power reduced above 25°C
 Ingress Protection Rating P54
 Enclosure Type 3R
 Data Logging 128 days
 Conduit Knockouts Bottom and sides
 Warranty 5 years
 Weight (lb/kg) Unit: 18.3 / 8.3 
 Dimensions H x W x D (in/cm) Unit: 22 x 8.8 x 6 / 55.9 x 22.4 x 15.2
 Options Remote Temperature Sensor (RTS), HUB4, HUB10.3, MATE3s
 Certifications UL 1741, CSA C22.2 No. 107.1, IEC 62109-1
 Minimum Battery Bank Size 100Ah
 Charging Range (Output) 20VDC to 68VDC
 Additional Features Built-in GFCI, field-replaceable cooling fan

Related Items

Epever Triron 40A MPPT 150V charge controller
Available early September

Recently Viewed Items